Contact Number
+603 - 5122 9888, 5122 0099
 
Valmatic

Valmatic
 
Gate Valve
  Page 1 of 1
Cast Steel Gate Valve
 
Cast Steel Gate Valve
 

VALMATIC® Gate Valves are designed and manufactures
accordance
to API Standard 600 specification with straight
through bore type rising stem, outside screw & yoke, bolted
bonnet and stainless steel trim. The open and closed position of
the valve is easily distinguished by the stem position. The
bonnet back seat bushing allows packing replacement even when
the valve is in fully opened position. The standard disc is
designed with one-piece flexible wedge. For Class 300 and
above, the valve’s body is made circular in shape as much as
possible to minimize distortion even under extreme operation
conditions.

VALMATIC® Gate Valve allows for two-way flow direction and
used for closing or opening the medium flow. This valve can be
installed in either horizontal or vertical positions in the piping
systems. It is widely used in process industries such as Palm Oil
and Refinery Plant, Food Industries, Petrochemical, Oil and Gas
Industries, Pulp and Paper Mill, Power Plant and Cooling System.

 
 
 
Cast Iron Rising Stem Gate Valve
 
Cast Iron Rising Stem Gate Valve
 

VALMATIC® Cast Iron Gate Valve is designed with straight
through bore type with rising stem, outside screw & yoke, bolted
bonnet and stainless steel trim. The open and closed position of
the valve is easily distinguished by the stem position. The Wedge
is replaceable without needing to remove the valve from the
pipelines.

VALMATIC® Cast Iron Gate Valve allows for two-way flow
direction and used for closing or opening the medium flow. This
valve can be installed in horizontal and vertical positions in the
piping systems. It is widely used in process industries such as
Palm Oil and Refinery Plant, Food Industries, Petrochemical, Fire
Protection System, Power Plant and Cooling System.

 
 
 
Ductile Iron Resilient Seated Gate Valve
 
Ductile Iron Resilient Seated Gate Valve
 

VALMATIC® Ductile Iron Resilient Seated Gate Valve is available
in DIN 3202-F4 standard. It is designed with straight through
bore type with rubber encapsulated wedge, non-rising stem,
inside screw and bolted bonnet. This valve provides positive
shutoff with minimal pressure drop and flow turbulence. The
Wedge is replaceable without needing to remove the valve from
the pipelines.

VALMATIC® Ductile Iron Resilient Seated Gate Valve allows for
two-way flow direction and used for closing or opening the
medium flow. This valve can be installed in horizontal and
vertical positions in the piping systems. It is widely used in
process industries such as Palm Oil and Refinery Plant, Building
Services, Water Treatment Plant, Fire Protection System and
Cooling System.

 
 
 
Cast Iron Non-Rising Stem Gate Valve
 
Cast Iron Non-Rising Stem Gate Valve
 

VALMATIC® Cast Iron Gate Valve is available in BS 5150
standards. It is designed with straight through bore type with
non-rising stem, inside screw and bolted bonnet. This valve
provides positive shutoff with minimal pressure drop and flow
turbulence. The Wedge is replaceable without needing to remove
the valve from the pipelines.

VALMATIC® Cast Iron Gate Valve allows for two-way flow
direction and used for closing or opening the medium flow. This
valve can be installed in horizontal and vertical positions in the
piping systems. It is widely used in process industries such as
Palm Oil and Refinery Plant, Fire Protection System and Cooling
System.

 
 
 
Brass Gate Valve
 
Brass Gate Valve
 

VALMATIC® Brass Gate Valve is designed with straight through
bore type with non-rising stem, screw on bonnet. It allows
operation under tough condition and is built to last. The wedge is
replaceable without removing the valve from the pipelines.

VALMATIC® Brass Gate Valve allows for two-way flow direction
and is used for closing or opening the medium flow. This valve
can be installed in horizontal and vertical position in the pipelines
system. The valve is applicable for Building Services, Plumbing,
Air-Conditioning System, Hot Water System and General
Industries.

 
 
 
Forged Gate Valve
 
Forged Gate Valve
 

VALMATIC® Forged Steel Gate Valves are designed and
manufactures accordance to ASME Standard with straight
through bore type, outside screw & yoke, bolted bonnet and
flexible solid wedge for closing the medium flow and provide high
tightness during valve closure. The open and closed position of
the valve is easily distinguished by the stem position. The Wedge
is replaceable without needing to remove the valve from the
pipelines.

VALMATIC® Forged Steel Gate Valve allows for two-way flow
direction and used for closing or opening the medium flow. This
valve can be installed in any position on the pipeline, It is widely
used in process industries such as Palm Oil and Refinery Plant,
Petrochemical, Power Plant, Oil and Gas Industries, Pulp and
Paper Mill, Heating and Cooling System.

 
 
 
 
(Displaying 1 - 6 of total 6)
Page 1 of 1
 
  Product Quick List  
 
Valmatic Product Range
 
 
 
 
Principal Product Range
 
 
 
 
Valmatic Technical Data
 
 
 
 
 
     
  Latest News  
  ISO Certified
We are ISO certified since June 2010.
 
 
  Registered Trademark
Valmatics Valves has been successfully registered as our trademark.
 
 
 
 
 
Copyright (C) 2010 Valmatic Engineering Sdn Bhd. All Rights Reserved | Sitemap