VALMATIC™ Cast Iron Swing Check Valve is designed to prevent backflow with minimum resistance to flow because of the full flow passage. With flow in one direction, the disc hinges upwards to permit flow through the valve. The Disc is held closed when flow is reversed.
VALMATIC™ Stainless steel Disco Check valve is designed to prevent the pipelines and related equipments against reverse flow of medium. This check valve provides high degree of tightness and reliability.
VALMATIC™ Cast Iron Twin Door Check Valve consists of wafer type body, plate, seat seal, torsion spring and pin provided internally. Reaction of torsion spring installed inner valve makes plate rapidly close prior to the start of the reverse flow of fluids to prevents pipelines, pump and others piping equipments from the damage and trouble due to the water hammer. This check valve provides automatic tight sealed shut off when there is a backflow. Hence, it is safe and reliable in operation.
VALMATIC™ Cast Iron Wafer Swing Check Valve is a single door designed for low head loss characteristics. This check valve is constructed with no obstruction inside the valve body when it is in the open position. It’s also provides a drip tight sealed by viton seat and the quick spring assisted closure against the reverse flow of fluids to eliminate the water hammer effect which prevents the pipelines, pump and others piping equipments from the damages. Hence, it is safe and reliable in operation.
30/11/2005 
